Chisel Tip Needles
These needles will clean the same material as a pointed tip but will leave light surface marking.
Flat Tip Needles
The flat tip needles will reduce marking on metal surfaces and can actually give a polishing finish. For use on thin gauge metals and any surface where light treatment is required. 2mm needle used on a welding joint produces a similar effect to shot peening, reducing stress in the weld.
Spark Resistant Berryllium Copper
Available in 3mm flat tip only for use in potentially hazardous areas.
Pointed Tip Needles
Sharpened to a conical point, these are the most effective in breaking through very hard scale on materials where some surface indentation is permissible – or where a roughening or keying of the surface is actually desirable
Stainless Steel Needles
Available in 3mm flat tip form only, to be used in applications such as refurbishment of food processing machinery or areas of high humidity where the corrosive effect on needles would be prohibitive. Used on decorative concrete surfaces where contamination of the surface from carbon steel needles is undesirable.
Chisels
Consists of air hose ¼’’ BSP claw – 2m
Consists of whip hose, whip check and
¼ lubricator
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.