TOPPER QVM 610AII + APC Machining center - vertical (TOPPER QVM 610AII + APC Machining center-vertical)

The machine is in very good technical condition, FANUC Oi-MD control system, pallet exchanger. The machine includes full machine cover, automatic lubrication system, hydraulic unit, air system, intensive chip area lighting, signal beacon 3, handwheel, setting elements, spindle load indicator, part counting, two-pallet exchange system, distribution from the center pin for hydraulics and table clamping air, 16 open M-codes (8-input and 8-output).

2 x Chip conveyor on the sides in the X axis
Chip conveyor belt with chip ejector, Emulsion mist extractor WS 1000, Renishaw lasser probe (tool break detection), Renishaw OTS wireless tool probe

Work table: Work
. area (lxw) 700 x 410 mm x 2
Workpiece weight 400 kg x 2
T-slot shape 18 x 4 mm x 2
Work table height 950 mm
Spindle:
Spindle taper 7/24 TAPER NO.40
Spindle speed 8000 rpm
Travel :
Travel (X / Y / Z) 610 x 410 x 460 mm
Dist. front spindle. from table 180 - 640 mm
Feed rate: X / Y / Z rapid traverse 36/36/30 m / min
ATC: Taper MAS - BT 40
Tension clamping pin MAS - P40T - 1
Tool capacity 24
Max tool diameter 80 (125 mm)
Tool length 250 mm
Tool weight 7 kg
Motor: Spindle motor 9 kW
Travel servomotor X / Y / Z 3/3/4 kW
Cooling motor 0.55 kW
Memory: 640 m
Pallet change time 4.9 s
Machine dimensions: LxWxH 2440 x 4090 x 2880 mm
Weight 7500 kg

Axis X	610 mm
Axis Y	410 mm
Axis Z	460 mm
Rotary table (4th axis)	no
Type of CNC	FANUC Oi-MD
Table length	700 mm
Table width	410 mm
Max. part weight	400 kg
Number of tool pockets	36
Spindle taper	BT 40
Max. spindle speed	8000 rpm
Spindle motor power	9 kW
-------------------
Length x width x height	2440.0 × 4090.0 × 2880.0
Weight	7500 kg
Worked hours
Hours under power
State	good
At local norms	---------
Status	visible