A fast machine with high long-life accuracy
The conception for the next millennium. A fast machine with high long-life accuracy and good working economy. Compact rigid engineering with low height. Special featues are:
Clamping beam
Folding beam
Bottom beam
Back gauge
Back gauge system
The motorized gauge MAH 25 leaves nothing to be desired. The table surface is equipped with steel balls for an easy movement of the work piece.
Thanks to the modular design the motorized back gauge MAH 25 R can also be extended subsequently o an L-shape or U-shape gauge.
CFP-control
Tool clamping WZS 2000 with hydraulic clamping
Clamping beam stroke 350 mm
Tool clamping WZS 3000 with mechanic clamping
Motorized bottom beam adjustment 60 mm
Motorized folding beam adjustment 60 mm
Crowning device, manual
– Sharp nose blade, 20°/30°, R 1/1,5/3, divided
– Goat‘s foot segment 120 mm,170 mm or 250 mm height, 20°/30°, R 1/1,5/3, clearance 45 mm, foot width 85 mm
– Tools, ca. 1100 N/mm², surface-hardened (phosphated), hydraulic clamping
– Bottom beam blade without finger grooves, H = 40 m, b = 88 mm, ca. 1100 N/mm² (Note! Minimum gauge dimension 95 mm)
– Bottom beam blade with finger grooves, ca. 1100 N/mm² (Note! Minimum gauge dimension 10 mm)
– Folding blade divided, H = 119 mm, b = 42 mm
– Folding blade segmented, H = 119 mm, b = 30 mm and b = 42 mm
– Folding blade segmented, cranked, H = 119/65 mm, b = 10 mm
– Biegeschiene segmented, 30°
– Tools, ca. 1100 N/mm²
– R-shape: 10 - 1600 mm or L-shape: 10 - 1600/2400 mm
– Angle gauge right or left, adjustable
– Equipment for 2-man operation
– Foot switch on linear guide
– Increase of clamping beam stroke to 500 mm
– Crowning device, motorized
– Tool cart for WZS 2000/3000
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.