Prerolling and fi nal rolling in one machine - thanks to its special roll concept, wide range of accessories and robust design, this is the machne for truly universal and cost-effective work on single jobs and in series production.
The easy way of prerolling and fi nal rolling with the motorized rounding machines of SchröderFasti Technologie.
There are many reasons why the „small“ slip bending rolls are one of the top-selling machines in the middle class. With its special roll concept, wide range of accessories and robust design, this is the machine for truly universal and cost-effective work on single jobs and in series production.
Pre- and fi nal rolling in one machine
That saves money, space and working hours. Due to the remarkable asymmetric roll arrangement, the Result is an exceptional part quality over the whole Length thanks to the parabolic geometry at the rolls.
The smallest possible diameter down to 1,25 x top roll diameter shows the quality of these machines.
The parabolic geometry of the rolls is one of the details for a perfect result.
A gear motor fl anged on the left side frame is driving the top and lower roll. At the right side you can easily release the locking handle, swing out the top roll and remove the fi nished part. A highly useful variation of options make it possible to confi gure the machine exactly to your needs.
The right accessories for all tasks
The slip bendings rolls 134 come extensively equipped to handle most jobs with ease. And for specifi c requirements, additional options are available.
Take advantage of FASTI‘s complex knowledge, and you will soon realize that nobody can offer more. Which is why more and more old hands visit our demonstration and consulting center to perform test work on their workpieces - just to make quite sure before deciding to invest. We have thought of everything when it comes to forming sheets with thicknesses from 1 to 6.5 mm. You can choose between various types with working length from 680 mm to 2540 mm and rolls with 68 to 160 mm diameter. Details can be found in the table on page 6 of this brochure.
Thanks to the asymmetric roll position you will get a perfect quality of the product. With its special roll concept, wide range of accessories and robust design, this is the machine for truly universal and cost-effective work on single jobs and in series production.
Rolls hardened and ground,
Roll diameter 80 - 120 mm,
Special top roll of 68 mm available
Change gear for top roll
Interchangeable roll - W
The optional control FM 2R offers the basic modes of a modern control with user-friendly and easy setting. The fast adjustment of back roll via potentiometer underlines the capability of the machine.
Standard:
Option:
Preselection of bottom roll control with geared brake motor via potentiometer
Products e.g.: Pipes, half-shells and funnels
Highlights of the CR 80 SPS control
The CR 80 control offers a very comfortably and userfriendly programming. Depending on the program, it is possible to make variable radii without bending marks. The calculation of diameters when producing pipes is done automatically.
The positioning of bending wheels, sheet feeding and back roll adjustment are frequency-controlled (only in combination with three-roll drive).
Products e.g.: Pipes, silencers, triangles, squares.
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.