The XL-Center is a remarkable folding innovation for roofing and architectural profiles. With 3200 mm folding length, the XL-Center offers technical excellence.
After the blank is loaded the grippers of the XL-Center take over the workpiece and automatically position the part for each bend. The grippers can clamp on straight material, but can also clamp on a closed hem.
Up and down folding eliminates a need to rotate the parts. Short cycle times, precision flange dimensions and angles, high levels of productivity and low costs per part guarantee a quick payback of the investment.
If the working length of the XL-Center is not long enough, tapered bent profiles can be connected to each other.
RAS has designed XL-Center with maximum free space in front of the folding beams and has also patented this aspect. The extremely large free area of 300 degrees creates room for the most complex part geometries.
The tools roll away with the blank and fold them without scratching pre-painted materials.
The operator draws the profile of the touch monitor or in the office using the Office software. The Bendex software automatically programs the part and suggests the optimum bending strategy. The software simulates the entire program cycle in either a 2D or 3D view.
The unique and powerful Bendex software automatically programs the parts. Its enormous fetaure list increases the throughput and productivity of the machine many times over.
Process optimization is so easy! While cutting just stick a QR code on the blank. At the XL-Center you only have to scan the code and the machine automatically loads the part.
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.