Thanks to the Kolarc MX600 Pulse technology, it helps you to obtain high quality welding outputs without the need for a transition arc that is difficult to control and causes burrs. At the same time, it eliminates spatter and cleaning after welding with its smart welding solutions.
With Kolarc MX600 Pulse's unique hardware, it is quickly adopted in just 10 minutes, and the ergonomic buttons of the wire feeder can be operated effortlessly even with welding gloves on. Thanks to its effortless and easy-to-use steps, it provides an increase in your “valuable” working time with the savings it provides in every area where it is used.
In Kolarc MX600 Pulse power supplies, the wire touches the workpiece at a lower wire speed than set. Optimum ignition parameters are applied according to wire type, diameter and gas type. It provides a perfect arc start that reduces contact nozzle consumption and prevents spatter.
Kolarc MX power supplies prevent agglomeration at the wire end at the end of welding. Thanks to the digital welding process regulation, it provides constant arc length penetration in different free wire distances and keeps the welding current constant in all situations by actively adjusting the wire feed.
Input Voltage
400 V
Mains Voltage Tolerance
-10 /+15 %
Minimum Welding Current
5 A
Maximum Welding Current
600 A
Duty Cycle, 40°C
1000A / %60 MIG, 1000A / %60 TIG, 1000A / %60 MMA
1000A / %100 MIG, 1000A / %100 TIG, 1000A / %100 MMA
Open – Circuit Voltage
75 V
Factory Delivered Roller Diameter
1.0 + 1.2 mm / Steel
Spool
D300
Dimentions (L, B, H)
Water Cold, W
532 mm x 1039 mm x 1346 mm
Weight
119 kg
Air Cold
530 mm x 1270 mm x 1050 mm
92 kg
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.