Geka Bendicrop 60 Ironworker Machines for Punching and Bending (Geka Bendicrop 60 Ironworker Machines for Punching)

Sheet metal punching, shearing and bending machine with two cylinders. Universal Hydraulic Ironworker with 6 workstations: Punching, Notching, Shearing Flat Bars, Angle Cutting, Bars Shearing and built-in Bending Station that complies to EC regulations.

Bendicrop 60 is part of Geka´s Bendicrop series of Ironworker machines.

This sheet metal punching, shearing and bending machine is equipped a blade holder with a vertical movement. This punching, shearing and bending machine has a great performance when working with iron, steel or cooper.

Bendicrop 60 is equipped with a touch and cut length stop and it is delivered with two V-shaped bending dies of 40 mm and 70 mm. This sheet metal punching, shearing and bending machine has an anti-torsion system that reduce deformation when shearing flat bars.

The workstations that are equipped within this sheet metal punching machine are the following:

• Punching station
• Triangular Notching station
• Flat Bars Shearing station
• Angles and Solid Bars Shearing station
• Built-in Bending station

There are 2 punching versions available in this sheet metal punching, shearing and bending machine that vary on the length of the throat.
2 Punching Throat versions available:

• S Version: 250 mm Standard Throat.
• SD Version: 500 mm Extended Throat.

The capacities of the Bendicrop 60 are in the following table:

• Capacities based on a material resistance of 45 Kg/mm2.
• GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
• Technical characteristics valid except for typographical errors or omissions.

• Flat bar shearing without distortion thanks to its anti-torsion system.
• Permanent bending station that complies with CE regulations.
• Shearing station for flat bars with 45º angle section cutting.
• Angle round and square bars shearing with minimum amount of distortion.
• Triangular Notching with Working Table. It is also suitable for Pipe and Tube Notching, Rectangular Notching.
• Die-holder with a goose neck for punching UPN and IPN profile portions on legs and webs. Changing punches and dies can be done quickly.