CINCINNATI Arrow VMC1250C Machining center - vertical (CINCINNATI Arrow VMC1250C Machining center - verti)

CNC system:
- SIEMENS Acramatic 2100 model
- number of X,Y,Z axes
Lubrication system:
- ball screw lubricator, P64 grease
- track bearings in the X, Y, Z axes, P64 grease
- headstock bearings automatically
- lubrication of the pneumatic system hydraulic oil P38
Cooling system:
- cooling liquid supply system by jet
- tank capacity 600 l
Air Requirements:
- air pressure at the inlet 5.8+-1 bar
- air consumption 10.5 dm3/s
Power consumption requirements energy:
- 22 kVA spindle drive
- axis drives (including the 4th axis) 24 kVA
- tool magazine motor 46 VA
- standard coolant pump 0.8 kVA
- 2.4 kVA cleaning motor
- pump during cooling through the spindle 8 kVA
- conveyor motor 0.8 kVA
- gearbox 0.75 kVA
- various 0.35 kVA
- cooling unit 1 kVA
- grease pump 24 VA
- pallet conveyor 1.2 kVA
- pallet cleaning 2.4 kVA
X,Y,Z axis movement ranges:
- longitudinal axis X - table 1270 mm
- transverse axis Y - cross support 762 mm
- vertical axis Z - 820 mm
Distance of the spindle from the work surface:
- min. 150 mm
- max. 970 mm
Table - X axis:
- dimensions of the work surface
- length 1370 mm
- width 765 mm
- load capacity 910 kg
Headstock - Y axis:
- AC motor 9 kW
- speed range:
- min. 60 rpm
- standard max. 8000 rpm
- increased revolutions max. 10000 rpm
- increased torque of max. 500 rpm
Linear axial displacements and loads:
- working feeds X,Y,Z 15000 mm/min
- rapid traverse X,Y 24 m/min
- rapid traverse Z 18 m/min
- axle load (during operation):
- X,Y 3 kN
- From 7 kN
Automatic magazine / tool change:
- capacity - number of tools 21
- tool weight with holder max 6.8 kg
- magazine load (with even distribution) max. 68 kg
- tool length max. 385 mm
- tool diameter (when adjacent spaces are filled) max. 80 mm
- diameter of the tool (if adjacent places are omitted) max. 160 mm
- tool change time (from cut to cut) 7.5 s
Machine weight / built-up area:
- net weight of the machine approx. 8800 kg
- total height of the machine (max) 3.6 m
- overall dimensions of the built-up area:
- without chip conveyor - width 4.618 m
- with chip conveyor - width 5.154 m
- open cabinet door - depth 2.55 m
Machine accessories
Acramatic 2100 CNC system
toolbox
electronic handwheel
Price negotiable.

Axis X	1270 mm
Axis Y	762 mm
Axis Z	820 mm
Rotary table (4th axis)	no
Type of CNC
Table length	1370 mm
Table width	765 mm
Max. part weight	910 kg
Number of tool pockets	21
Spindle taper
Max. spindle speed	8000 rpm
Spindle motor power	9 kW
-------------------
Weight	8800 kg
Worked hours
Hours under power
State	good
At local norms	---------
Status	visible but unplugged
Datasheet	Cincinnati Arrow VMC1250C